-
1 air duct of rectangular cross-section
короб вентиляционный 1)
Воздуховод прямоугольного (коробчатого) сечения, применяемый в системе вентиляции и кондиционирования воздуха
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]1) Устаревший термин
[Интент]
Прямоугольный воздуховод
[http://www.normal-vent.ru/materiali_izgotovleniya_vozduhovodov.shtml]Тематики
Синонимы
EN
DE
FR
Англо-русский словарь нормативно-технической терминологии > air duct of rectangular cross-section
-
2 air duct
воздуховод
Замкнутый по периметру канал, предназначенный для перемещения воздуха или смеси воздуха с примесями под действием разности давлений на концах канала.
Примечание. По форме поперечного сечения воздуховод может быть прямоугольным или круглым.
[ ГОСТ 22270-76]
воздуховод
Трубопровод для принудительного перемещения воздуха в технических целях
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Тематики
EN
DE
FR
воздухопровод
Трубопровод для подачи воздуха к металлургич. агрегатам, конструкция к-рого зависит от назнач. Напр., в. для подвода воздушного дутья к фурмам домен. печи выполняется в виде опоясыв. стальной трубы с внутр. диаметром < 1400 мм, футеров. изнутри огнеупорным кирпичом.
[ http://metaltrade.ru/abc/a.htm]Тематики
EN
воздушный канал
вентиляционный канал
воздухопровод
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
Синонимы
EN
короб вентиляционный 1)
Воздуховод прямоугольного (коробчатого) сечения, применяемый в системе вентиляции и кондиционирования воздуха
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]1) Устаревший термин
[Интент]
Прямоугольный воздуховод
[http://www.normal-vent.ru/materiali_izgotovleniya_vozduhovodov.shtml]Тематики
Синонимы
EN
DE
FR
Англо-русский словарь нормативно-технической терминологии > air duct
-
3 air channel
воздуховод
Замкнутый по периметру канал, предназначенный для перемещения воздуха или смеси воздуха с примесями под действием разности давлений на концах канала.
Примечание. По форме поперечного сечения воздуховод может быть прямоугольным или круглым.
[ ГОСТ 22270-76]
воздуховод
Трубопровод для принудительного перемещения воздуха в технических целях
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Тематики
EN
DE
FR
канал вентиляционный
Воздуховод в системе вентиляции, устраиваемый в толще конструкций или в подвесных наружных коробах
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]Тематики
EN
DE
FR
короб вентиляционный 1)
Воздуховод прямоугольного (коробчатого) сечения, применяемый в системе вентиляции и кондиционирования воздуха
[Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)]1) Устаревший термин
[Интент]
Прямоугольный воздуховод
[http://www.normal-vent.ru/materiali_izgotovleniya_vozduhovodov.shtml]Тематики
Синонимы
EN
DE
FR
Англо-русский словарь нормативно-технической терминологии > air channel
-
4 disc type winding
дисковая катушечная обмотка
Катушечная обмотка, собранная из отдельно намотанных катушек, выполненных в виде плоских спиралей из одного провода или нескольких параллельных проводов
[ ГОСТ 16110-82]Параллельные тексты EN-RU
Aluminum or copper foil disk in high voltage winding.
[ABB]Обмотка высшего напряжения дискового типа из алюминиевой или медной полосы.
[Перевод Интент]
Medium voltage, dry-type transformers may have their high voltage windings constructed using either the layer winding technique or the disc winding technique.
In the disc winding, the required number of turns are wound in a number of horizontal discs spaced along the axial length of the coil. The conductor is usually rectangular in cross-section and the turns are wound in a radial direction, one on top of the other i.e. one turn per layer, until the required number of turns per disc has been wound. The conductor is then moved to the next disc and the process repeated until all turns have been wound. There is an air space, or duct, between each pair of discs. The disc winding requires insulation only on the conductor itself, no additional insulation is required between layers, as in the layer winding.
Disc windingThe disc wound high voltage winding is usually wound in two halves, in order that the required voltage adjustment taps may be positioned at the electrical center of the winding. In this way the magnetic, or effective length of the winding is maintained, irrespective of which tap is used, and therefore the magnetic balance between primary and secondary windings is always close to its optimum. This is essential to maintain the short circuit strength of the winding, and reduces the axial electromagnetic forces which arise when the windings are not perfectly balanced.
Transformer with disc wound coils[Dry-Type disc wound transformers in medium voltage applications. Derek R. Foster I.Eng. MIIE]
Computer aided winding process
Рис. ABB
Тематики
Обобщающие термины
Синонимы
EN
Англо-русский словарь нормативно-технической терминологии > disc type winding
-
5 disc winding
дисковая катушечная обмотка
Катушечная обмотка, собранная из отдельно намотанных катушек, выполненных в виде плоских спиралей из одного провода или нескольких параллельных проводов
[ ГОСТ 16110-82]Параллельные тексты EN-RU
Aluminum or copper foil disk in high voltage winding.
[ABB]Обмотка высшего напряжения дискового типа из алюминиевой или медной полосы.
[Перевод Интент]
Medium voltage, dry-type transformers may have their high voltage windings constructed using either the layer winding technique or the disc winding technique.
In the disc winding, the required number of turns are wound in a number of horizontal discs spaced along the axial length of the coil. The conductor is usually rectangular in cross-section and the turns are wound in a radial direction, one on top of the other i.e. one turn per layer, until the required number of turns per disc has been wound. The conductor is then moved to the next disc and the process repeated until all turns have been wound. There is an air space, or duct, between each pair of discs. The disc winding requires insulation only on the conductor itself, no additional insulation is required between layers, as in the layer winding.
Disc windingThe disc wound high voltage winding is usually wound in two halves, in order that the required voltage adjustment taps may be positioned at the electrical center of the winding. In this way the magnetic, or effective length of the winding is maintained, irrespective of which tap is used, and therefore the magnetic balance between primary and secondary windings is always close to its optimum. This is essential to maintain the short circuit strength of the winding, and reduces the axial electromagnetic forces which arise when the windings are not perfectly balanced.
Transformer with disc wound coils[Dry-Type disc wound transformers in medium voltage applications. Derek R. Foster I.Eng. MIIE]
Computer aided winding process
Рис. ABB
Тематики
Обобщающие термины
Синонимы
EN
Англо-русский словарь нормативно-технической терминологии > disc winding
-
6 disk type winding
дисковая катушечная обмотка
Катушечная обмотка, собранная из отдельно намотанных катушек, выполненных в виде плоских спиралей из одного провода или нескольких параллельных проводов
[ ГОСТ 16110-82]Параллельные тексты EN-RU
Aluminum or copper foil disk in high voltage winding.
[ABB]Обмотка высшего напряжения дискового типа из алюминиевой или медной полосы.
[Перевод Интент]
Medium voltage, dry-type transformers may have their high voltage windings constructed using either the layer winding technique or the disc winding technique.
In the disc winding, the required number of turns are wound in a number of horizontal discs spaced along the axial length of the coil. The conductor is usually rectangular in cross-section and the turns are wound in a radial direction, one on top of the other i.e. one turn per layer, until the required number of turns per disc has been wound. The conductor is then moved to the next disc and the process repeated until all turns have been wound. There is an air space, or duct, between each pair of discs. The disc winding requires insulation only on the conductor itself, no additional insulation is required between layers, as in the layer winding.
Disc windingThe disc wound high voltage winding is usually wound in two halves, in order that the required voltage adjustment taps may be positioned at the electrical center of the winding. In this way the magnetic, or effective length of the winding is maintained, irrespective of which tap is used, and therefore the magnetic balance between primary and secondary windings is always close to its optimum. This is essential to maintain the short circuit strength of the winding, and reduces the axial electromagnetic forces which arise when the windings are not perfectly balanced.
Transformer with disc wound coils[Dry-Type disc wound transformers in medium voltage applications. Derek R. Foster I.Eng. MIIE]
Computer aided winding process
Рис. ABB
Тематики
Обобщающие термины
Синонимы
EN
Англо-русский словарь нормативно-технической терминологии > disk type winding
-
7 disk winding
дисковая катушечная обмотка
Катушечная обмотка, собранная из отдельно намотанных катушек, выполненных в виде плоских спиралей из одного провода или нескольких параллельных проводов
[ ГОСТ 16110-82]Параллельные тексты EN-RU
Aluminum or copper foil disk in high voltage winding.
[ABB]Обмотка высшего напряжения дискового типа из алюминиевой или медной полосы.
[Перевод Интент]
Medium voltage, dry-type transformers may have their high voltage windings constructed using either the layer winding technique or the disc winding technique.
In the disc winding, the required number of turns are wound in a number of horizontal discs spaced along the axial length of the coil. The conductor is usually rectangular in cross-section and the turns are wound in a radial direction, one on top of the other i.e. one turn per layer, until the required number of turns per disc has been wound. The conductor is then moved to the next disc and the process repeated until all turns have been wound. There is an air space, or duct, between each pair of discs. The disc winding requires insulation only on the conductor itself, no additional insulation is required between layers, as in the layer winding.
Disc windingThe disc wound high voltage winding is usually wound in two halves, in order that the required voltage adjustment taps may be positioned at the electrical center of the winding. In this way the magnetic, or effective length of the winding is maintained, irrespective of which tap is used, and therefore the magnetic balance between primary and secondary windings is always close to its optimum. This is essential to maintain the short circuit strength of the winding, and reduces the axial electromagnetic forces which arise when the windings are not perfectly balanced.
Transformer with disc wound coils[Dry-Type disc wound transformers in medium voltage applications. Derek R. Foster I.Eng. MIIE]
Computer aided winding process
Рис. ABB
Тематики
Обобщающие термины
Синонимы
EN
дисковая обмотка
—
[Я.Н.Лугинский, М.С.Фези-Жилинская, Ю.С.Кабиров. Англо-русский словарь по электротехнике и электроэнергетике, Москва, 1999 г.]Тематики
- электротехника, основные понятия
EN
Англо-русский словарь нормативно-технической терминологии > disk winding
См. также в других словарях:
прямоугольный воздуховод — короб вентиляционный 1) Воздуховод прямоугольного (коробчатого) сечения, применяемый в системе вентиляции и кондиционирования воздуха [Терминологический словарь по строительству на 12 языках (ВНИИИС Госстроя СССР)] 1) Устаревший термин [Интент]… … Справочник технического переводчика
КОРОБ ВЕНТИЛЯЦИОННЫЙ — воздуховод прямоугольного (коробчатого) сечения, применяемый в системе вентиляции и кондиционирования воздуха (Болгарский язык; Български) вентилационен канал (Чешский язык; Čeština) hranatý [obdélníkový] vzdu chovod (Немецкий язык; Deutsch)… … Строительный словарь
building construction — Techniques and industry involved in the assembly and erection of structures. Early humans built primarily for shelter, using simple methods. Building materials came from the land, and fabrication was dictated by the limits of the materials and… … Universalium
Waveguide — This page is about waveguides in the most general sense. For ordinary metal pipe waveguides, Waveguide (electromagnetism). For optical waveguides, see Waveguide (optics). A section of flexible waveguide with a pressurizable flange … Wikipedia
Electrical wiring — in general refers to insulated conductors used to carry electricity, and associated devices. This article describes general aspects of electrical wiring as used to provide power in buildings and structures, commonly referred to as building wiring … Wikipedia
Bass reflex — A Bass reflex system (also known as a ported, vented box or reflex port) is a type of loudspeaker enclosure that uses the sound from the rear side of the diaphragm to increase the efficiency of the system at low frequencies as compared to a… … Wikipedia
ear, human — ▪ anatomy Introduction organ of hearing and equilibrium that detects and analyzes noises by transduction (or the conversion of sound waves into electrochemical impulses) and maintains the sense of balance (equilibrium). The human ear, like … Universalium
tunnels and underground excavations — ▪ engineering Introduction Great tunnels of the world Great tunnels of the worldhorizontal underground passageway produced by excavation or occasionally by nature s action in dissolving a soluble rock, such as limestone. A vertical opening … Universalium
Central Asian arts — Literary, performing, and visual arts of Afghanistan, Azerbaijan, Kazakhstan, Kyrgyzstan, Mongolia, Nepal, Tibet, Turkmenistan, Uzbekistan, and parts of China and Russia. The term usually denotes only those traditions not influenced by the… … Universalium
sound — sound1 soundable, adj. /sownd/, n. 1. the sensation produced by stimulation of the organs of hearing by vibrations transmitted through the air or other medium. 2. mechanical vibrations transmitted through an elastic medium, traveling in air at a… … Universalium
Sound — /sownd/, n. The, a strait between SW Sweden and Zealand, connecting the Kattegat and the Baltic. 87 mi. (140 km) long; 3 30 mi. (5 48 km) wide. Swedish and Danish, Oresund. * * * I Mechanical disturbance that propagates as a longitudinal wave… … Universalium